| PRODUCTS | ORIGIN | ||
 Trunnion mounted ball valve |
 One piece threaded, Floating Ball Valve, BW, SW |
Gate, Globe, Check, Ball, Wellhead, Choke, & API 6A Gate valves with material of carbon steel, cast iron, stainless steel and alloy steel. Based on our high technology equipped foundry facility, workshop and laboratory, we will leave you completely satisfied with our quality products in both commodity and special application lines. | EU, G7 |
 Gate Valves |
 Floating Ball Valve |
These valves range of Gate, Globe, Check, Ball & Butterfly Valves are produced to meet the demanding needs and high specification requirements of the Oil & Gas, Petrochemical, Chemical, Energy & Power, Water & Sewage Treatment and Pulp & Paper markets.Manufactured and tested to exacting international quality standards including API 600, API-6D, ANSI B16.34, ASME B16.34, BS 5351 and API 598i the range extends from 2″ to 36″ in ANSI Class 150, 300, 600, 900, 1500 and 2500lb in cast carbon steel, stainless steel and high performance alloys. | EU, G7 |
 Pilot-Operated Pilot-operated regulators provide sensitive, accurate control of gas in fuel gas and commercial/industrial service applications to maintain a constant set outlet pressure even when inlet pressure fluctuations or variations in flow occur. |
 Direct-Operated Direct-operated regulators are used in fuel gas applications to maintain a constant set outlet pressure within 10 percent to 20 percent of set point. |
Pressure reducing regulators maintain desired outlet pressure providing the required flow to satisfy a variable downstream demand. The level at which the reduced pressure is maintained is the outlet pressure setting of the regulator.A comprehensive range of gas pressure regulators from low pressure PN 0.1 up to high pressure PN 100/ANSI 600 is available. The applications range from low-capacity residential use for individual households, commercial and industrial uses up to the field of gas transmission where it is necessary to control high flow capacities. They meet the highest standards in terms of performance and quality. All our regulators and governors are in accordance with EN 334 and EN 14382 or DIN 33822 and are approved by DVGW. | EU, G7 |
 Slam shut off valve |
 Slam shut off valve |
The Slam Shut Valve protects gas installations against dangerous under pressure and overpressure conditions and is normally fitted on the inlet side of the regulator. This regulator is available with a visual and/or micro switch valve position indicator. The manual reset has an automatic integral equalizing valve ensuring safe resetting procedures and eliminating costly by-pass systems. |
|